country = Tanzania
comments = I wonder if you are able to give me tips about buolding a
furnace using charcoal as energy - power. I am working with introducing
metalcasting in Tanzania and the gas is difficult to get but the charcoal
is cheap and very much available.

greetings
city = Bagamoyo
name = Arne Stenius.


country = Australia
comments = Would your ebook pack contain a list of Australian 
suppliers for all the things I will require to start  aluminium sandcasting?
Or am I asking for too much. 
city = Empire Bay  N.S.W
name = D Hardie.
And the answe is: Yes.


state = ND
country = United States
comments = Hey!  No fair!  I wanted to do your ezine thing and
the link to get it says 404
Must be a bad link.  Got another one?
name = J Tor.


Hi Col,

First of all, I live in The Netherlands and over here it's pretty hard to get some
good information concerning the casting of metals. This often results in 
consulting a foundry who makes the requested parts (including the molds)
using one of the oldest metalshaping techniques known to human race........(duh, 
where did we leave all our ancient knowledge?)
While I mostly use really small series it's getting really expensive to get some
small parts cast (not mentioning the problems with dimensioning, casting flaws
and the lack of interest in casting small series).

After some deskresearch I ordered a lot of books (some are good on the subject
and others are less) which all have their own vision about (sand)casting. But I had
some problems finding good literature concerning patern making, in special complex
core's. In the search for more information about this subject I stumbeled across
your website, and after some reading I came to the conclusion that the Ebooks and
Ezine are pretty much practical minded (the way I like it). The part about the
making of core's made me deside to order the other stuff also (as an extension of
my library on this subject, to further expand my view on the subject and to avoid
making the mistakes that others already have done for me).

A second major plus is it's affordability and that it can be pursuaded in small
steps (so it's possible to make a thorough evaluation of it's value to  the pursuader,
before spending a big amount of mony to something you don't need).

And finaly there is some great and quick support if there are any problems
(thanks Col).

Regards,
Sjef.


state = NJ
country = United States
comments = Hi,

I purchased the Ebook Knowledge tool kit under the recent promotion and never
received any sort of download link. I did receive a paypal receipt but there is no
information enclosed. Please let me know how I can download the ebooks.
Thanks. My paypal transaction ID is: ********29W15370731

Sincerely,
J M Evans.
city = Gibbsboro.


country = Australia
comments = How else can I pay for your 3vol metal casting made easy
offer (not comfortable with net purcheses) I'm in Australia.
Peter
city = Perth W Australia
lname = Lawson.


country = Ireland
comments = Hi, I am thinking of purchasing your book but first 
I have a question for you.
I have built a few race engines and I was wondering if it would be
possible for me to cast an aluminium alloy cylinder head? 
I suppose the hardest thing to produce would be the cavity for
internal waterways.
I know this would be very difficult to make but I am skilled at
metalworking and have great patience, however I know next
to nothing about metal casting.

Thank you.
city = Co. Sligo
J  McTiernan.

And when things go wrong!
After i paid i was expecting to be routed to a down-load page,..i
then never recieved any further information,...dont know were
the problem was..........thanks for your e-mail on guiding me
to the proper page..........Larry.

The answer.
We are always ready to provide help with downloads that go
wrong, so dont panic if you lose the download link, we are
only to happy to provide another link.