Hobby Foundry Mega-Pak Returns.
(But Only For Christmas)

The Ideal Christmas Gift For The
Practical Foundry Man.
Is there someone close to you who is stumped for that special
Christmas gift for you? Why not make a suggestion to them
about this mega pak.

Get Absolutely More Bang For Your Buck While You Can.
The best value package on offer. 

A Letter From: Col Croucher.
 
Dear Friend,

Today you are lucky, because two or three decades ago, the important basic knowledge required to set up a home hobby foundry was almost non existent... and when you thought you were close to the answer, you'd end up lost down a dead end street...


With just a few clicks of the mouse, you can have all of the info you need within a few minutes.

But please take note... the Mega Pak in it's present form will be only available for the next 72 hours... (Three days) a great chance to secure your Mega Pak either as a download or on CD ROM.... Keep reading if you are serious about getting a heap of practical knowledge to help kick start your metal casting hobby in the next few weeks.

If you've been exploring the how and why of backyard foundry, you might be keen to make a start... you're eager to get your hands into the sand, but perhaps you're still NOT sure what to do next, there is probably only two options...

(1) Keep searching & wondering... if you have the time (And believe me you'll need heaps) plus lots of patience as you read through hundreds of different web pages... gather the bits you need, then put "your system" together, but the fragmented nature of the available info will mean your'e still not one hundred percent sure!

(2) Just do what most people do, jump the queue, get everything you need in one hit, and get stuck into the learning curve, makes sense really... it is so easy & quick to download ebooks, or if you prefer, order a CD ROM which is loaded with the same down to earth practical info you need. Ebooks which explain everything you need for; building - setting up - establishing & running your own little hobby foundry, you will be able learn just about everything you need to know, even little known recipes for home made furnace refractory and other special things like crucible sizing charts, and other handy quick reference guide sheets. 

My guess is that you are a practical - hands on type of person, (otherwise you wouldn't be here right now would you?) you're not afraid to roll up your sleeves and have a go. With a little bit of effort you could soon be emulating the people featured in the Metal Casting Masters of 2008 ebook, (Gosh, this book has been so popular with 1000s of downloads) it is a great read, and has been the catalyst for many people to begin metal casting the people featured in the book are just like you and me... just ordinary people who want to cast metal. 

The stories & projects are amazing, but you should also realize that many of the people featured in the casting masters ebook were once in the novice category... but not any more, they are now experienced metal casters producing high quality castings using "low-tech" home built foundry gear, and as well as producing their own castings, several people we know have also generated a handy second income purely  from their foundry skills by making & selling small niche products produced in their micro foundry enterprise, and crikey, who couldn’t do with a few extra bucks in the pocket these day's, Mmmm, you're nodding your head, you obviously agree, you will be amazed at what you can do when you put your practical skills to work!

One of our Australian clients has set up a small production line, he is casting a small aluminium product which he sells for about AU$42.00 each on eBay... he is doing really well with his product... and you want to  know something.. "It costs less than 50 cents to make", for privacy reasons we cant reveal this product, but Tim was really happy about his niche enterprise the last time I spoke to him.

The process was simple; he learned all he could about the craft, then applied the knowledge to develop, make & sell a product, he makes quite a bit of money from his niche product every week! Very nice indeed on top of his normal salary.

The Mega Hobby Foundry Knowledge Tool Kit Will Help You Along The Pathway To Success.

This HUGE collection of unique hobby foundry ebooks & short reports has enabled thousands of people around the globe (Over 57 countries so far) to begin casting metal within a short time, but it depends of course, on how much effort you want to put in, but the interesting thing about many of the people involved with this metal craft hobby is that not all are engineers or retired trades people...  

Our client list consists of; Doctors & other professional workers, IT specialists who want to switch off from the cyber world, there are farmers, vintage car & motorcycle restorers, artist's, electricians, we also have several community education facilities using our instruction ebook manuals, metal craft artists, musical instrument makers, underwater photographers & people who build telescopes, yes, I kid you not, we also have scientists, & CEO’s of large Corporations as clients, as well as people who work on oil rigs out in the North Sea, we have military guys doing their tour of duty in the Middle east, clients who are building ultra light aircraft... these people have a desire & need, either now or in the near future to develop & cast a myriad of unique cast metal items, the biggest advantage of producing your own metal castings is the control you have over the entire process, not to mention the money you'll save.

The other advantage in producing your castings is the great personal rewards & satisfaction gained simply by creating special cast items, even if they are simple in design, you will quickly learn to tap into that creative resource you have hidden deep inside of you, few crafts provide the personal reward quite like that of the hobby foundry metal craft.

So far we have discussed the many possibilities awaiting you with your hobby foundry, the best idea is to begin with simple projects, then gradually work your way up to more complex projects, that is the only sure way to success without experiencing too many set backs, and I should warn you though, there will be failures, but don't let that discourage you, the odd failure here and there can often be the best teacher.

You still with me? Good... Because you deserve something special as a reward simply for visiting our web site, joining our list, ezine, or downloading the Casting Masters of 2008 ebook, or the trial book; Metal Casting Made Easy.


 The Right Place At The Right Time.
Through sheer luck, you are in the right place at the right time, because right now we want to give you an opportunity to invest in your own personal rewards as well as your metal craft future, we don't want to make a big thing out of this right now, but every now and again we release this special mega offer to a limited number of people. 

If you've already started your foundry journey, or just thinking about it, then this is for you, we have put together an absolute monster ebook package consisting of all of our ebooks including the Sheet Metal Roller ebook, and to save on data transfer & download times the ebook package is delivered as a compressed ZIP file, after downloading, you simply unpack the Zip file onto your hard drive into which ever folder you choose. 

If your computer/download speed is as slow as a wet week, don't worry, because you can also order the mega monster package on CD Rom... which was not offered previously. 

It has never been easier than right now to get all of the hobby foundry info you need in the shortest time possible, there's no hassle, no traipsing all over town looking for a library, and definitely no waiting for the snail mail to arrive, unless you order the CD, but that will be shipped via airmail the day you place your order.

(YES, CD Rom orders are also being accepted with this offer, see below).

But if you choose to download, you'll be granted instant access to the download page! Either way, you also qualify for instant MHF Membership.

• Enjoy the freedom to be an ultra creative metal caster - Once you begin to understand just what can be achieved with metal casting, the sky is the limit.

• Become a leading light in your hobby - No longer will you drool over what other people are producing, because you could be the one that others will look up to.

• Imagine what your friends will think when you show them your cast metal creations - Yes, they will be hanging off every word you say as you explain to them how you made the patterns, rammed the sand molds, and cast the metal, you'll have their attention for sure.
  
  Read What Glen Had to say.
  

• The more you learn, the more things you will be able to create - Most people have a deep desire to create, but to feed that creativity you need fuel in the form of "how to knowledge", the ebooks we have assembled for you today will have more than enough knowledge to keep you going for many years.

• Become an instant member of MHF. - MHF membership is also automatically granted to you as soon as you purchase the ebook package, (Even CD Rom Orders) you'll be able to access more knowledge and learning, including every published edition of the Hot Metal ezine. (72 All told)
  

• 
  Why wait any longer to do something you've always wanted to do. - Life is short, time is limited, why wait to do something you've always wanted to do for a long, long time, our ebooks will help guide you along the pathway.
  
  Read what Mike had to say:
  

What you might expect to achieve with your metal casting skills? You will probably have a different set of goals to the next person, but process will be the same, that is, you'll take a pattern... ram up a sand mould... choose to melt & pour either bronze or aluminium into the pattern cavity in the sand mold, both metals are extremely versatile, and used to make thousands of different shaped cast metal items.

So what is your aim?
Only you will know the answer, and you don't have to tell anybody if you don't want to, just keep your focus firmly fixed on your desired goal, that is all you have to do for now. Once you download your HUGE package of ebooks (Eleven all told) you are going to have to do a lot of reading and learning, but it wont be like going back to school, (This is actually fun) when you have your equipment & tools built, and that is explained in detail exactly how to go about building the gear, even down to the smallest of details with the hand tools you'll be using.  

Building your own tools and equipment can be just as much fun as pouring the molten metal, and you'll reap so much more personal reward from these projects too. Every now and again, a client will proudly email us some photos of their completed metal casting projects, we really enjoy that... make sure to keep us posted wont you.

• The Three Volume Metal Casting Made Easy.
• Design Of Gates & Risers.
• Pattern Making Workshop Practice. (Always sold separately) (But Included in Pkg @ BIG Discount)
• Decorative Metal Work. (Always sold separately (But Included in Pkg @ BIG Discount).
• How To Build Sheet Metal Rollers. (Always sold separately).
• You can read more about each of the ebooks here:  main web site & page, (Opens in New Browser) then return to this page, this web page has no return links, you are here by invitation only. Special offer is only available from this page for limited time.
  

PLUS: The total package will also include the  valuable bonus ebook pack, outlined below ( #1 to #10) plus access to the MHF Membership Area: Total Bonus Value: $79.60US.

Bonus #1:
Petro Bond User Guide. Value $9.95US.
This ebook is the industry standard guide to moulding success with petro bond sand.

Bonus #2:
How To Build Crucible Tongs. Value $9.95
How to build crucible lifting tongs will explain to you the fine art of building a safe pair of crucible lifting tongs, there is a right and a wrong way to go about this, we'll teach you the right way.

Bonus #3:
How To Make RTV Patterns & Moulds. Value $9.95.
RTV silicone is the wonder material of the 21st century, it is used widely in many types of industrial applications. The foundry industry quickly realized it's huge potential in the reproduction of patterns and moulds. We'll outline how you can combine this RTV material and ordinary car body filler to make repro patterns to great effect. This ebook is provided as a free download also.

Bonus #4:
How To Build High Quality Cope & Drag Mould Boxes. Value $9.95
Foundry work requires sand to be rammed into mould boxes (Flasks) called the cope & drag, without them you wont be able to make good quality sand moulds. Using light steel plate and an arc welder, the home fabricator can build high quality, robust mould boxes with excellent flask to flask registration. This Free "How To build" ebook will show you how it is done. And think about this, you need build only one mould box and you potentially have saved three-times the price of the complete ebook package alone, (If you compare homebuilt costs with the price of commercial flasks or mould boxes).

Bonus #5:
How To Build A Hot Wire Foam Cutter. Value $9.95
Learn how to build your own professional style foam cutter. The foam cutter will enable high quality styrene foam patterns to be quickly made. You will surprise yourself at just how quick and easy it is to cut and assemble foam patterns.

Bonus #6:
Instant Calculation & Conversion Software. Value $9.95
Hate doing sums and manual maths calculations? This software will convert and calculate in the click of the mouse. It is simple to install and dead easy to use. All you need to do is input the value of whatever you want to calculate or convert, and the program will give you an instant answer.

Bonus #7:
Gain Instant "Free Lifetime Access" To The MHF Member Area. Value $9.95 Per month.
The My Home Foundry member area can be accessed 24/7, you choose your own unique password & user name which enables you to login at any time to read and learn more about hobby foundry work, membership is ONLY available to customers who purchase the standard or mega packages on offer here today. This is just another reward we give to you as a valued customer. You won't be paying $9.95 per month membership, it is our gift to you.

We've Also Included These Extra Bonuses Below!

Bonus #8: Special Foundry Overview Manual. (NEW). Value $9.95.
A very special seven page manual which outlines and provides a short summary of what foundry work is all about, reading this will help you to put things in perspective before you begin. 

Bonus #9: Crucible Size & Capacity Sheet. (NEW). 
This info sheet provides information pertaining to crucible dimensions & capacity, invaluable when deciding what size crucible you will need for your set up.

Bonus #10: Furnace Firebrick Info Sheet. (New).
Learn about the values & characteristics of fire bricks and the materials they are made of, handy if you ever want to build a cupola furnace.

The collection of valuable bonus ebooks & Info sheets outlined above, plus the MHF membership have a total combined value of over $79.60US! But you get them all for FREE.

We Back Our Products With A Solid Guarantee. If you are not happy with what we provide to you within 30 days we will refund your money, we can't be any fairer than that can we.

I'm sure that you will appreciate the big savings on offer here, & to be honest, it is our loss and your gain, so make the most of it while you can. I think you'd be crazy to miss out on a total saving of $26.00US, plus when you take into account the included value of the bonus ebooks, makes this an extremely valuable resource package... and available for instant download in just a few short moments, or if you prefer, you can order the package on CD Rom.

At Such A Great Price Can You Really Afford NOT To Invest In The
“Hobby Foundry Knowledge Tool Kit Mega Monster Package”

  Christmas Offer Expires In Three Days Time.
This Page Will Then Be Removed From Our Server. 
  
Yes, you can also place your CD Rom order through the bottom
Pay Pal button. $93.97. Includes airmail delivery world wide.

Total Bonus Value Included With This Offer:

  Ebook Package Discount = US$28.00.

 Total Value Of Included Bonuses = US$79.60.

 An Amazing US$107.60 of extra value included!

And a great opportunity for you to grab the mega monster package Via Download or CD Rom.
Don't you owe it to yourself to at least try the Hobby Foundry Knowledge Tool kit Package today.

Click To Contact Us: